Study on the correlation between the quality parameters of silicone rubber and the releasing of fluorouracil implants
-
摘要: 目的 分析硅橡胶分子量及黏度特性对氟尿嘧啶植入剂释放度的影响。 方法 依据GN/T21863-2008标准和《中国药典》对不同批号硅橡胶的分子量分布和黏度进行检测，记录数均分子量、分子量分布和黏度，采用相同制剂工艺制备20份不同硅橡胶的小试样品，依据国家药品标准WS1-（X-103）-2005Z对小试样品的释放度进行检测，以数均分子量（X1）、分子量分布（X2）和黏度（X3）作为X变量，以120 h释放度结果作为Y变量，使用Minitab 16.0软件进行多元回归分析，确定硅橡胶关键质量参数。 结果 多元回归分析表明，数均分子量和黏度参数是关键质量参数（P<0.05），分子量分布为非关键质量参数（P>0.05）；120 h释放度的线性回归方程：Y=-0.3+3.76 X1+0.267X3。 结论 硅橡胶数均分子量和黏度是影响氟尿嘧啶植入剂释放度的关键质量参数，产品生产过程中应依据制剂工艺参数对硅橡胶的制备进行严格控制，从而最大程度降低硅橡胶对产品质量稳定性造成的影响。Abstract: Objective To analyze the effect of the molecular weight and viscosity of silicone rubber on the release of fluorouracil implants. Methods According to GN/T21863-2008 standard and Chinese Pharmacopoeia, the molecular weight and viscosity of different batches silicone rubber were tested, number average molecular weight, molecular weight distribution and viscosity were recorded, which as X variables. 20 different silicone rubber samples were produced by same preparation process, and WS1-(X-103)-2005Z were used to test the release of each sample, which as Y variable. Minitab 16 software was used to determine the key quality parameters of silicon rubber by multiple regression analysis. Results Number average molecular weight and viscosity were the key quality parameters of silicon rubber, P<0.05, molecular weight distribution was not the key quality parameter of silicon rubber, P>0.05; The linear regression equation was:Y=-0.3+3.76 X1+0.267X3. Conclusion Number average molecular weight and viscosity of silicone rubber were the key factors affecting the quality parameters of fluorouracil implants releasing, thus strictly control treatment should been implemented on the two quality parameters during production process, for reducing the effect of silicone rubber on the quality stability of the product maximally.
-
Key words:
- implants /
- fluorouracil /
- quality parameters /
- releasing /
- silicone rubber
-
[1] 徐刚,胡朝奇. 术中植入氟尿嘧啶植入剂在原发性肝癌切除术治疗中的应用价值[J].中国现代医生,2015,53(11):112-114. [2] 刘琴,汤莉,丁宁,等. 缓释管组成结构对药物缓释速率的影响因素研究[J].生物医学工程学杂志,2012,29(2):296-300. [3] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T21863-2008凝胶渗透色谱法(GPC)用四氢呋喃做淋洗液[S].北京:中国标准出版社,2008. [4] 国家药典委员会.中华人民共和国药典(四部):2015年版[S]. 北京:中国医药科技出版社,2015:24. [5] 国家食品药品监督管理局. WS1-(X-103)-2005Z氟尿嘧啶植入剂国家药品标准[S].北京:中国标准出版社,2005. [6] 徐刚,战祥青,胡朝奇. 抗肿瘤植入剂在直肠癌根治术中应用的可行性探讨[J].中国现代医生,2016,54(7):129-131. [7] 叶世富,陈炀,首峰,等. 5-氟尿嘧啶与吉西他滨联合同期放疗治疗局部进展胰腺癌的临床效果[J].中国医药导报,2017,14(14):84-87. [8] MURAKAMI M,SAITO T,TABATA Y. Controlled release of sphingosine-1-phosphate agonist with gelatin hydrogels for macrophage recruitment[J]. Acta Biomater, 2014, 10(11):4723-4729. [9] 陈瑶. 高分子药用控释及缓释载体材料特点及在高血压治疗中的应用[J].中国组织工程研究,2016,29(43):6530-6536. [10] 徐刚,胡朝奇. 正交试验设计优化氟尿嘧啶植入剂制剂工艺研究[J].中国医药导报,2015,12(19):19-23. [11] NAGARWAL R C,KUMAR R,PANDIT J K. Chitosan coated sodium alginate-chitosan nanoparticles loaded with 5-FU for ocular delivery:in vitro characterization and in vivo study in rabbit eye[J].Eur J Pharm Sci,2012,47(4):678-685. -
点击查看大图
计量
- 文章访问数: 2905
- HTML全文浏览量: 281
- PDF下载量: 681
- 被引次数: 0
下载:
